Water & Gas Worx installs gas hobs and cooktops in Glen Innes and all of Auckland, New Zealand. Call 0800 322 322 — certified gasfitter, we install, test, and certify. Gas Safety Certificate (GSC) or Certificate of Compliance (COC) issued with every install. One tradesman handles gas pipe, connection, and compliance.
Call Now — We'll Sort It 0800 322 322Written and reviewed by Peter — qualified plumber and certifying gasfitter, PGDB registered, 17+ years experience. Last updated April 2026.
Like-for-like gas hob replacements in Glen Innes start from $310+GST, which includes disconnection, reconnection, gas testing, and a gas certificate. New gas line installations cost more depending on pipe run distance. Most hob swaps take 1–2 hours. Call 0800 322 322 for a fixed quote.
Whether you're near Taniwha Street, Line Road, Apirana Avenue, Elstree Avenue, or around Glen Innes Town Centre, GI Shops, Panmure Basin — we come to you in Glen Innes with everything needed to get your gas hob connected and certified.
New builds and modern townhouses in this area are often plumbed for gas from day one — the gas line is already roughed in to the kitchen during construction. If yours is, installation is straightforward. If not, we run a new line from the meter and connect it up. Many new developments here are going with gas hobs and electric ovens — the most popular combo in new Auckland homes.
We also cover nearby Meadowbank, Panmure, Mt Wellington, St Heliers.
Assess the job — we check your existing gas supply, the hob location, and what's needed. New gas line or existing connection? Natural gas or LPG? We figure it out.
Run the gas line — if there's no existing gas to the kitchen, we install a new gas line from the meter to the cooktop location. Copper or stainless, properly supported and protected.
Connect the hob — we connect the gas hob to the supply, install the correct bayonet or rigid connection, and ensure the hob is level and seated properly in the benchtop.
Pressure test — we test the entire gas line for leaks at the required pressure. No leaks, no compromise.
Commission and certify — we fire up each burner, check flame pattern and ignition, adjust if needed, and issue a Gas Safety Certificate (GSC). This is required by law for every gas installation.
If you're swapping an old gas hob for a new one and the gas connection is already there, this is a straightforward job. We disconnect the old hob, connect the new one, test, and certify. Usually done within an hour or two.
If your kitchen currently has an electric cooktop and you want to switch to gas, we need to run a new gas line. This involves:
If you don't have gas to the property at all, we can arrange an LPG bottle setup — two 45kg bottles with an automatic changeover valve.
Some areas of Auckland have natural gas (piped from the street). Others need LPG bottles. Most gas hobs come in both variants, or can be converted with a jet change. We'll advise which applies to your Glen Innes property and make sure the hob is set up for the right gas type.
We install all brands. These are the most popular ones we see in Auckland kitchens:
Kiwi brand, widely available. 60cm and 90cm models. Good parts availability.
Premium European quality. Popular in renovations. Excellent burner performance.
Italian design, popular in high-end kitchens. 70cm and 90cm options.
Reliable mid-range option. Common in new builds and rental properties.
Every gas hob installation in New Zealand must be done by a certified gasfitter and a Gas Safety Certificate (GSC) must be issued. This is a legal requirement under the Gas Act.
The GSC confirms the installation has been tested, is safe, and complies with NZ standards. You'll need this certificate if you ever sell your home, for insurance purposes, and for your own safety records.
We issue the GSC as part of every gas hob installation — it's included, not an extra.
A straight hob swap on an existing gas connection is the most affordable option. A new gas line installation costs more depending on the distance from the meter to the kitchen. We'll give you a clear price before starting — no surprises.
No. Gas work must be done by a certified gasfitter in New Zealand. It's illegal and dangerous to do your own gas connections. We handle everything and issue the required certification.
A hob swap takes 1-2 hours. A new gas line run plus hob install is typically half a day, depending on the route and distance.
Either way works. You can buy your own hob and we'll install it, or we can supply and install. If you're buying your own, just make sure it matches your gas type (natural gas or LPG).
Yes — most hobs can be converted by changing the gas jets. We carry common jet sizes and can usually do the conversion during the same visit.
Need a Gas Hob Installed? Call 0800 322 322 — certified gasfitter.
Call Now