HOT WATER AUCKLAND WIDE
Auckland Wide
Licensed Plumber
Fixed Pricing
17+
Years Experience

Request a Callback

Thanks — we'll be in touch!

We've received your enquiry and will call you back shortly.

Rinnai Enviroflo 265L integrated heat pump hot water cylinder
Heat Pump — Outdoor Integrated

Rinnai Enviroflo 265L — Supply & Install Auckland

Suits 2–4 people

From
$7,499 incl. GST
Rinnai Enviroflo 265L — Supply & Install
$7,499 incl. GST — Auckland wide

What's Included

  • Rinnai Enviroflo 265L unit supplied
  • Old cylinder disconnected and removed
  • Connected to existing plumbing
  • Outdoor electrical switch and connection
  • Condensate drain installed
  • Warranty registered with Rinnai NZ
Apex lead-free combi valve pack

Valve pack included

Weatherproof isolator switch

Isolator switch included

Quick answer:The Rinnai Enviroflo GR 265L is an integrated heat pump hot water cylinder with R290 refrigerant — $7,499 incl GST fully installed across Auckland by Water & Gas Worx. COP 4.1, 46 dB(A) operation, suits 2-5 people. Price includes supply, installation, old unit removal, electrical connection, and Rinnai warranty registration. Installed by Peter — licensed plumber. Call 0800 322 322.

About the Rinnai Enviroflo 265L

The Rinnai Enviroflo 265L sits at the centre of the heat pump range — 265 litres of capacity at a COP of 3.8, making it the most efficient unit at this price point. A household of two to four people gets both the storage capacity to handle back-to-back morning showers and the energy efficiency to cut the annual hot water bill to $200 to $350. The Enviroflo runs at 43 dBa — noticeably quieter than many competing units, which matters if the installation site is close to living spaces or boundaries.

Rinnai designed the Enviroflo as an all-in-one outdoor unit with an integrated compressor, heat exchanger, and cylinder. There are no indoor components and no refrigerant lines to run between a separate heat pump and tank. This simplicity reduces installation time and eliminates the refrigerant-handling that split systems require. Every installation by Water & Gas Worx includes full plumbing connection, outdoor electrical circuit, condensate drain, and warranty registration with Rinnai NZ.

The Enviroflo 265L is available Auckland wide. For homes replacing a mid-size electric cylinder — typically a 180L or 250L indoor unit — the Enviroflo installed outdoors frees up the internal cupboard completely. Alternatively, if you are building or renovating and want to specify a heat pump hot water system from the start, the Enviroflo is one of the most cost-effective long-term choices available.

Technical Specifications

Capacity265 litres
TypeIntegrated heat pump
COP (coefficient of performance)3.8
Noise level43 dBa
Backup element1.8 kW electric
Operating range−5°C to 43°C
Warranty5-year compressor, 5-year cylinder
RefrigerantR134a
Suitable for2–4 people

Why This Unit for Auckland?

What Our Customers Say

S

Shailendra

Google Review

★★★★★

Peter installed our new infinity hot water system and gas line for our stove. He was very professional, thorough, turned up on time, cleaned up after himself and worked very hard, especially crawling under the house to get the plumbing done. Job well done, and also charges were reasonable, and as quoted. All work certified and legit.

Infinity hot water system & gas line installation

P

Paula

Google Review

★★★★★

Fantastic service, had us up and running with hot water the same day we rang as our old system had died. Great workmanship and tidy work, would recommend!

Hot water system — same-day replacement

M

Marvynne

Google Review

★★★★★

What was a very stressful time for me when my under the bench hot water cylinder leaked at the beginning of the Easter weekend was made so much easier when I contacted Water and Gas Worx. They replaced the cylinder when they said they would and arrived on time. The plumber was very courteous, worked hard and efficiently, tidied up the mess and took away the rubbish.

Under-bench cylinder replacement — Easter weekend callout

L

Lance

Google Review

★★★★★

We just had Pete out to install a continuous flow gas hot water system. Pete did an outstanding job, quickly with no fuss and was super great to deal with. I highly recommend Pete.

Continuous flow gas hot water installation

J

Judy

Google Review

★★★★★

Peter helped me change the water cylinder. I am very impressed with the clean and tidy job he did. He left the place spotless. Excellent communication throughout.

Water cylinder replacement

R

Robert

Google Review

★★★★★

Needed a new hot water cylinder. Discussed requirements, got a cost to install new system, arranged a date and time. System installed. Very easy and as described. Great service.

Hot water cylinder replacement

Frequently Asked Questions — Rinnai Enviroflo 265L

What is the Rinnai Enviroflo 265L installed price in Auckland?
The Rinnai Enviroflo 265L is $7,499 incl GST fully installed. This includes the unit, old cylinder removal, plumbing connections, outdoor electrical circuit and switch, condensate drain, and warranty registration.
How efficient is the Rinnai Enviroflo 265L?
The Enviroflo has a COP of 3.8 — it produces 3.8 units of heat per unit of electricity consumed. This translates to running costs of approximately $200 to $350 per year for a two to four person Auckland household, compared to $700 to $1,000 for an equivalent standard electric cylinder.
Is the Rinnai Enviroflo 265L quiet?
Yes. At 43 dBa it is one of the quieter heat pump cylinders on the market — similar to a library or quiet office. We recommend installing it at least two metres from bedroom windows, but most Auckland homeowners find this noise level acceptable even in closer positions.
Does the Rinnai Enviroflo work in Auckland winters?
Yes. The Enviroflo operates down to minus 5 degrees Celsius. Auckland winters typically stay above 5 degrees, meaning the unit runs at full efficiency year-round. The 1.8 kW backup electric element activates automatically if ambient temperature drops below the heat pump's range.
How long does a Rinnai Enviroflo 265L installation take?
A standard installation — replacing an existing electric cylinder — takes approximately four to six hours. This covers disconnection and removal of the old unit, outdoor placement of the Enviroflo, plumbing connections back to the hot water distribution, electrical circuit, condensate drain, and testing.
What warranty does the Rinnai Enviroflo 265L carry?
Rinnai provides a 5-year warranty on the compressor and a 5-year warranty on the cylinder. We register the warranty with Rinnai NZ on the day of installation so the clock starts from installation date, not purchase date.
Can I replace a gas cylinder with the Rinnai Enviroflo?
Yes. If you are on a gas storage cylinder and want to switch to heat pump, we cap the gas line, install the Enviroflo outdoors, and connect it to your existing hot water plumbing. We quote the full transition including any gas line work.

Ready to go? Call 0800 322 322 and we'll sort it.

Call Now
Last updated: April 2026